The Importance Of Grease Traps
Nowadays, more and more establishments and processing plants are using grease traps. These devices are used to trap greases, oils, and fats from the foods and other wastes before they are allowed to enter in a waste water treatment facility. Waste waters contain significant amounts of fats and oils which need to be eliminated before they are treated. Usually, in big tanks, they place these devices at the entrance of the waste water facility so that the oils will be removed and only non greasy water will go to the chambers of the treatment facility.
Once oils enter the waste water treatment facility, they will form a scum that thickens through the days. The large and very thick scum will then hinder the flow of the waste water and thus make the treatment process slower. These scum should be pulled from the chambers or much better prevent them from going in.
The traps have four main kinds. The most common of them all is the one which are installed in the sink compartments of kitchen to remove those fats from water and foods. This type is mostly installed in domestic houses and small restaurants.
Another type makes use of very large tanks with very big storage capacity for fats, grease, and oils. The tanks are made of concretes and steels that are mostly installed in bigger restaurants and some department stores. This type is known as gravity interceptor because it makes use of gravity in order to trap down those oils and fats.
The third type is more expensive than the first two types because it makes use of electricity and some power source. The good thing about this type is that it can easily remove the oils and fats on the surfaces. Depending on the size, it may trap large amounts of these materials. It works in such a way that a hydrostatic pressure is applied to the greases for easy removal.
Another thing about this type is that it has a strainer on it which has the capacity to automatically remove the debris from the materials you are using in your plant. Enough care should be taken though because this has a lot of wires which may pose dangers and other forms of damages if not placed in the right place.
The fourth type will make use of a biological process. Biological enzymes are placed to the tanks that could digest the fats and oils. These fats and oils will be converted by the microorganisms into water and gases which are much safer to discharge in the environment particularly in the drainage system. You may use this together with the automated dosing machine and the maintenance would be very minimal. This is one advantage of it.
Grease traps or grease interceptors are used in most industrial countries around the world because of their importance. All manufacturing plants are required to have a waste water treatment facility. Thus, this grease remover becomes very valuable in the whole treatment process because it previously separate the oils and fats from the waste water in order to prevent formation of scum which will block the passage of water to the chambers of the treatment facility. In choosing particular kinds of traps, you may browse the net or simply contact the supplier to know more about each kind.
Regular maintenance of Grease traps can prevent major plumbing issues that can cost thousands to fix. Get your grease traps London Ontario cleaned today by Steam Canada Carpet Cleaning Inc 762 Industrial Road, London, ON N5V 3N7 (519) 659-4444
Tags: advice, business, environment, Equipment, family, grease, home, industrial, manufacturing plants, services, society, tips